PRODUCT
DESCRIPTION
hp Injector is a precise synthetic
formulation that exceeds the
lubrication demands of modern
two-cycle motors. Today’s two-cycle
outboard motors operate at higher
temperatures and at leaner oil and
fuel ratios than older motors. This
difficult operating environment
requires proper lubrication
technology to keep motors running
long and strong. hp Injector is a
premium lubricant engineered with
AMSOIL synthetic base oils and
MAXDOSE advanced additives. It
contains up to 30 percent more
additives than other TC-W3 two-cycle
oils for “super clean” operation.
And because AMSOIL synthetic oils
are more durable, they are perfect
for lean mixture operations. In
addition, this AMSOIL exclusive
product produces low smoke and odor
and has low aquatic toxicity
properties, making it ideal for
boats.
hp Injector improves engine life. It
helps prevent deposits that cause
ring sticking and ring jacking
(carbon build-up behind the ring,
forcing it outward), a phenomenon
that occurs in modern DFI outboard
motors. hp Injector reduces wear. It
has excellent lubricity properties
and provides a good lubricating oil
film, protecting pistons and
bearings. hp Injector protects
against rust, an important feature
where motors are subjected to water.
hp Injector provides superior
performance in direct fuel injected
(DFI), semi-direct fuel injected
(SDI), electronic fuel injected (EFI)
and carbureted outboard motors, as
well as other recreational
equipment.
FEATURES
-
Superior performance in DFI
outboard motors
-
Reduces piston and combustion
chamber deposits
-
Protects against "ring jacking"
common to DFI outboards
-
Low smoke, low odor product
-
Contains up to 30 percent more
additives for "super clean"
operation
-
Reduces wear for long engine
life
-
Protects against rust
-
Multi-functional and recommended
for use in many two-cycle motors
-
Low aquatic toxicity
-
Recommended for use as injection
oil or at a 50:1 pre-mix
APPLICATIONS
hp Injector is recommended for use
in all two-cycle outboard motors
including, but not limited to,
Mercury® EFI & Optimax®, Johnson®
and Evinrude® FICHT® and E-TEC™,
Yamaha® HPDI, Nissan® and Tohatsu®
TLDI®, Suzuki®, Mariner® and Force®.
Also recommended for use in all
two-cycle personal watercraft and
jet boats, as well as snowmobiles,
motorcycles and ATVs.
Use as injection oil or as 50:1
pre-mix (2.6 oz. per U.S. gallon of
gas) where NMMA TC-W3 or API TC oils
are specified. Compatible with
mineral and synthetic TC-W3-type
two-cycle oils, however, mixing
two-cycle oils should be minimized.
|
TYPICAL TECHNICAL
PROPERTIES
hp Injector
Synthetic 2-Cycle
Oil
|
|
Kinematic Viscosity @
100°C, cSt (ASTM D-445) |
8.5 |
|
Kinematic Viscosity @
40°C, cSt (ASTM D-445) |
46.8 |
|
Viscosity Index
(ASTM D-2270)
|
160 |
|
Pour Point °C (°F) (ASTM
D-97) |
-46 (-51) |
|
Flash Point °C (°F)
(ASTM D-92) |
86 (187) |
|
Fire Point °C (°F)
(ASTM D-92)
|
86 (187) |
|
DANGER:
harmful or fatal if
swallowed. Contains
synthetic lubricant
and petroleum
distillates. If
swallowed do not
induce vomiting.
Contact a physician
immediately. Keep
away from fire, heat
and open flame. Use
with adequate
ventilation. Avoid
frequent or
prolonged skin
contact. Flush eyes
with water for 15
minutes in case of
contact.
KEEP OUT OF REACH OF
CHILDREN.
|
|
