Package sizes include:

    1-Quart Bottle
    1-Quart Bottles (case of 12)
    30-Gallon Drum
    55-Gallon Drum

G2156 - Motorcycle Oils White Paper
Harley Davidson Recommendations

AMSOIL MCF is multi-functional and fulfills the requirements of both domestic and foreign motorcycles. It outperforms other conventional and synthetic motorcycle oils.

AMSOIL, the leader in synthetic lubrication, produced the world’s first API qualified synthetic motor oil in 1972. Trust the extensive experience of AMSOIL The First in Synthetics® to do the best job protecting your motorcycle.

Reduces Friction, Heat and Wear
In high heat conditions, engine protection is not sacrificed with AMSOIL Synthetic Motorcycle Oil. It has the best high temperature film strength (see High Temperature Viscosity Protection graph below) of all oils tested and contains a heavy treatment of anti-wear additives to reduce wear regardless of the operating conditions (see Wear Comparison graph at right). AMSOIL MCF is thermally (heat) stable and contains maximum levels of oxidation inhibitor additives. It is extremely resistant to breakdown and engineered to prevent damaging sludge and carbon deposits for superior engine cleanliness.

10W-40 Motorcycle Oil High Temperature Viscosity Protection
Higher values reflect better film strength
ASTM Test Method D-4683 March 16, 2005

 
10W-40 Motorcycle Oil Wear Comparison
ASTM Test Method D-4172 March 16, 2005 

Provides Extreme Pressure Quality Protection for Gears
With AMSOIL MCF, there is no need for separate transmission lubricants. It is absolutely shear stable and will not thin out from mechanical activity. AMSOIL MCF performs like a gear lube without the negative effects of extreme pressure additives. In the FZG gear test, AMSOIL MCF achieved a perfect score with a “zero” wear rating (see photos below).

FZG Gear Test (ASTM D-5182)
AMSOIL 10W-40 (MCF)
 

FZG Gear Test (ASTM D-5182)
Motul 300 V 10W-40 

Delivers Superior Rust Protection
Motorcycles are prone to rust from storage, humidity and short drives. Rust can cause major damage such as uncontrolled wear, compression loss and blow-by. Good rust protection, however, comes by design and is not natural to engine oils. Unlike many motorcycle oils, AMSOIL MCF contains special anti-rust agents. It passes the ASTM D-1748 humidity cabinet rust test and clearly demonstrates superior rust protection (see photos below).

Rust Test ASTM D-1748
AMSOIL 10W-40 (MCF)
 

Rust Test ASTM D-1748
Castrol GPS 10W-40

Provides Excellent Wet Clutch Performance
AMSOIL MCF contains no friction modifiers and promotes smooth shifting and positive clutch engagement. AMSOIL MCF controls heat and prevents slippage and glazing, and its high TBN resists acids that can degrade clutch material, helping improve clutch life.

APPLICATIONS
AMSOIL Synthetic 10W-40 Motorcycle Oil is recommended for liquid or air-cooled 4-stroke engines. It meets SAE 80W/90, API GL-1 gear oil requirements and is recommended for transmissions on both 4- and 2-stroke motorcycles. AMSOIL MCF is recommended for Honda®, Kawasaki®, Yamaha®, Suzuki®, BMW®, Husqvarna®, KTM® and other motorcycles where 10W-40 or 20W-40 engine oils or SAE 80W/90, GL-1 gear oils are used. Not recommended for shaft drive hypoid gears or where an API GL-4 or GL-5 gear oil is required.

MIXING AMSOIL
AMSOIL Synthetic 10W-40 Motorcycle Oil is compatible with conventional and synthetic motor oils; however, mixing oils may shorten the oil life expectancy and reduce the performance benefits. AMSOIL does not support extended drain intervals where oils have been mixed. Aftermarket oil additives are not recommended for use with AMSOIL motorcycle oil.

SERVICE LIFE
For “on road” use in engines and transmissions, change AMSOIL MCF and AMSOIL engine oil filter at twice the motorcycle manufacturer change interval or one year, whichever comes first. Change other brand oil filters at standard intervals.

For “off road” use in engines and transmissions, change AMSOIL MCF at the standard motorcycle manufacturer change interval.

For racing or in engines modified from the original factory design, no change interval recommendation is made. Oil changes are at the owner’s discretion.