Product
Description
The Marine Dual Remote Filtration
System (BMK18) offers easily
accessible remote mounting
capability for a full-flow spin-on
oil filter and a spin-on by-pass oil
filter. This unique combination of
both full-flow and by-pass
filtration on a single mounting
manifold is the only system of this
kind designed specifically for
marine applications.
Improved Performance
The effects of marine
engines running
predominantly at or near
full throttle after extended
periods of non-activity
include high operating
temperatures and increased
potential for wear on engine
components. Dual remote
filtration is a highly
efficient filtering process
capable of removing the vast
majority of particles in the
5-20 micron range; those
that cause the most wear.
Dual remote filtration also
has the ability to
effectively remove particles
down to one micron in size.
The AMSOIL Marine Dual
Remote Filtration System
(BMK18) offers a clear
advantage by providing
better oil filtration,
increased oil capacity and
longer oil and filter life. |
 |
Reduces
Heat
The BMK18 requires a one- to
two-quart oil volume increase,
offering increased oil cooling
capabilities. The additional hoses,
fittings, filters and aluminum mount
assemblies also allow the engine oil
to dissipate heat more efficiently
as it passes through the filtration
system, extending the service life
of both the engine and the engine
oil.
Outstanding Durability
The Marine Dual Remote
Filtration System is
designed to be used in harsh
marine environments. The
hose fittings are coated
with a 3 ml layer of
Alumiplate™ and 1 ml of zinc
and yellow chromate. This
Alumiplate coating is 10
times more corrosion
resistant than standard zinc
and yellow chromate plated
fittings. While standard
hydraulic fittings typically
survive 96 hours in the
grueling ASTM B-117 Salt
Spray Test, the Alumiplate-coated
AMSOIL Marine By-Pass System
fittings lasted over 1,000
hours. In addition, the
fasteners and mounting
bracket are stainless steel
and the hoses are U.S. Coast
Guard approved. |
 |
Fewer Oil
Changes
Depending on the boat owner’s hours
of use, the improved filtration of
the Marine Dual Remote System, along
with the use of AMSOIL synthetic
lubricants, could completely
eliminate oil and filter changes
during a typical boating season.
With marine engines located in a
relatively confined and remote space
within the watercraft, ease of
filter access and reduced oil
spillage are also significant
benefits of the BMK18.
Applications
A large number of marine diesel
engines have by-pass oil filtration
systems installed by the engine
manufacturer. Until now, however,
this technology has not been
available to smaller pleasure boats
and light commercial marine
applications. The AMSOIL Marine Dual
Remote Filtration System was
specifically designed for
recreational and commercial marine
applications that use inboard or
inboard/outboard stern drive
engines.
The BMK18 is packaged in kit form,
which includes the Dual filter
mount, mounting hardware, hoses,
hose fittings, component parts and
installation instructions. In
addition, adapter kits of four
different sizes enable the BMK18 to
be installed on a wide variety of
recreational and light commercial
marine gasoline-fueled engines,
including those manufactured by
Chris Craft, Chrysler, Crusader,
Evinrude, Johnson, Gray Marine,
Mercruiser, OMC, Pleasurecraft,
Universal, Volvo Penta and
Westerbeke.
The BMK18 kit offers a new
heavy-duty, machined aluminum
adapter and retaining nut that fits
on the existing oil filter mount.
Each adapter kit is application
specific and must be ordered
separately. Consult the Marine Dual
Remote Application Guide (G2051) or
www.amsoil.com for specific
applications. Adapter kits are
available for the most popular
filter thread sizes. When ordering
the BMK18, request one of the
following adapter kits:
•
BK195 for 3⁄4" x 16 thread
• BK196 for 13⁄16" x 16 thread
• BK197 for 18 mm x 1.5 mm
thread
• BK198 for 20 mm x 1.5 mm
thread
Also, for ease of installation in
some applications, optional
90-degree fittings (BK199 and BK200)
can be mounted on the filter adapter
collar. These parts are also sold
separately.
The AMSOIL Marine Dual Remote
Filtration System represents the
cutting edge of filtration
technology, another example of the
AMSOIL commitment to providing
quality innovations that benefit
consumers everywhere.
The remote mount of the BMK18 is
compatible with the AMS-Oiler™ Oil
Precharger (AMK01). For added engine
protection, install the AMK01 to
reduce dry starting which is typical
of marine engines that sit idle for
even short periods of time.
Specifics
|
Oil Capacity |
1 to 2 quart
increase
|
|
Corrosion resistant |
Yes
|
|
External oil filter
changes |
Yes
|
|
Remove moisture and
condensation |
Yes
|
|
Ease/convenience of
maintenance |
Yes
|
|
Contaminant removal |
Down to 1 micron
|
|
