| |
|
Performance
With an extremely rugged
hi-grade carbon steel
reservoir and anodized
aluminum base, the AMS-Oiler®
is crafted to withstand
severe service and to
perform reliably in any
personal, commercial or
industrial application.
Unlike other pre-charger
systems, the AMS-Oiler® has
no bulky moving parts which
need maintenance and does
not rely on pressurized gas
to function. Unlike
air-actuated competitors,
the AMS-Oiler® can be
mounted at any angle and
discharges oil even under
the most severe conditions.
|
 |
|
The AMS-Oiler® is
substantially smaller, more
convenient to mount and
safer than large, bulky,
pressurized gas devices.
Pressurized gas units
AMS-Oiler® Oil Precharger
By-Pass/Dual Remote Mounted
(AMK-01) & Stand-Alone
(AMK-02) range from 18 to 21
inches long with a diameter
up to four inches, while the
AMS-Oiler® is only about
eight inches long and four
inches wide. The AMS-Oiler®
is a self-contained,
streamlined unit that has a
mechanical life cycle
exceeding one million engine
starts, with no maintenance
required. The AMS-Oiler® is
self-lubricating with an
integrated overpressure
protection device that
protects units from
retaining pressures in
excess of 65 p.s.i. |
Applications
While every engine could benefit
from use of an AMSOiler®, vehicles
especially prone to frequent
starting, such as taxicabs, delivery
fleets, marine applications, service
vehicles and many family and
personal vehicles, would extend
their engine life with the simple
addition of an AMS-Oiler®.
Engines that sit idle for extended
periods of time, such as in farm,
service, recreation or marine
equipment, are given more time for
the oil to drain down, resulting in
increased wear during dry-starting.
An AMS-Oiler® can provide the
instant lubrication necessary to
save these engines significant wear
and prevent damaging metal-on-metal
contact.
Operation
The AMS-Oiler® outperforms gas and
air charge systems. With the turn of
a key to the on position, an audible
95 db signal will sound for two
seconds while a 12-volt DC solenoid
initiates the unit’s operation. When
the oil delivery process is
complete, the signal will cease and
the operator can start the engine.
The absence of a gas or air charge
eliminates the possibility of
cross-contamination of dirty gas or
air with the engine oil, keeping the
oil pure and performing optimally.

|
AMS-Oiler™
Approximate
Dimensions
|
|
AMK-01 |
7.40 x 2.50 x 2.50
inches |
|
AMK-02 |
7.90 x 2.50 x 2.50
inches |
|
Current Draw |
1 AMP |
|
Spring pressure
|
Normal 35 psi |
|
Spring force
|
Fully retracted 100 lbs.
Fully extended 15lbs |
|
Solvent compatibility
|
Gasoline: Yes; Diesel
Fuel: Yes; Soot Rich
Oil: Yes |
|
Oil discharge volume
|
160 cubic centimeters |
|
Recommended viscosity |
All motor oil grades
|
|
Operating temperatures
|
-30°F to 120°F |
|